Call: 01428 606616
Following a demonstration by Mike Salmon of Maranello Concessionaires Ltd on Tuesday the 2nd of November 1971, Mr Geoffrey Edwards of Surrey, placed an order for a new 365 GTC/4 to be finished in metallic pale green with beige interior with green tartan inserts. In turn Maranello Concessionaires then managing director, Mr Sean Bealey, placed order number 549 on the 29th of November 1971 with the factory for a Verde Nijinsky with beige VM3224 with cloth 41 centres with beige carpets for March delivery. The Ferrari factory acknowledged the order to Maranello Concessionaire on the 21st of December 1971 .Completed-some two months late, and by chassis number, the 302nd of 505 built-and invoiced to Maranello Concessionaires Ltd on the 10th of May 1972 to be delivered to the UK by lorry. Mr E had moved to Jersey and never took delivery, for on Wednesday the 7th of June 1972the car was invoiced to Mr D V of London taking his Blu Dino 1972 246 GT in part-exchange for £5,200, against the new list price of £9,540.76. The registration number *** *** being applied for the first time on the 2nd of June 1972.
PLEASE CONTACT MIKE WHEELER FOR MORE DETAILS AND TO ARRANGE VIEWING
With only 31 cars officially imported into the UK and with currently just 19 “taxed” or SORN’d ,this is indeed a rare find. A useable 2+2 Ferrari with the added benefit of power assisted steering, self levelling rear suspension and air conditioning in a car with a unique and detailed history.
The 365 GTC4 took up where the 365 GT 2+2 left off and, thanks to careful interior design, Ferrari succeeded in slotting in two small rear seats, while retaining the more compact dimensions of two-seater coupé bodywork.
The V12 engine
The V12 engine was slightly detuned compared to the 365 GTB4 and the maximum revs lowered to render it less high-strung, highlighting its torquey nature and making it more tractable at low speeds. But in true Ferrari tradition, the engine could be wrung out to over 7,000 rpm with ease. Most of the production was sold in the United States.
The 365 GTC4 model was unveiled at the 1971 Geneva Show, and was effectively a replacement for two models in the range, the 365 GTC which had ceased production in 1970, and the 365 GT 2+2 that was dropped from production upon the announcement of the new model.
It fulfilled the roll of the former admirably, by being a more conservatively and less aggressively styled coupe cousin to the 365 GTB4 berlinetta, but only partially succeeded in fulfilling the roll of the latter, as the rear seats of the 2+2 seating arrangement were marginal, for all but very small children.They did however have the facility of folding backs, to provide a useful luggage platform. An unusual feature of the interior was that the seat centres and door trim were upholstered in a plaid cloth material, unique to this model, although the more normal full leather trim remained available upon request.
From the outset both European and USA market versions were available, the latter being fitted with emission control equipment that sapped performance, and was recognisable by rectangular side marker lights on the front and rear wings.
This was the first new 12-cylinder Ferrari model announced after the Fiat takeover of road car production control in 1969, and for a completely new body style had a relatively short production run into the autumn of 1972, by which time 500 examples had been built. However, the mechanical layout was carried over into the succeeding 365 GT 2+2 model virtually unchanged, apart from a lengthened chassis.
The Body style
The body style was very different from the models that it replaced, gone were the graceful rounded curves and the elliptical radiator grille, to be replaced by a much more angular wedge design, which was coming into vogue at the time. It had a very low nose featuring a full width black rubber front bumper that surrounded the shallow rectangular radiator grille, with rectangular driving lights and side/turn indicator light units housed in the extremities of the grille opening.
Retractable twin headlight units were set in the flat upper nose panel between the bumper and leading edge of the full width bonnet, which had similar rectangular exhaust air outlets to those on the 365 GTB4 model.
The front flowed with plain body sides into a five window cabin, in which the profile of the side glass could probably be best described as sharp teardrop shaped, which ran at a constant shallow angle through the boot lid into a neat Kamm tail.
Triple lens rear light assemblies were mounted on either side of an inset tail panel, below which was a plain matt black bumper to balance the black rubber unit at the front of the car.
The body was designed, constructed, and trimmed by Pininfarina, and then sent to Ferrari for the mechanical components to be fitted. It was constructed in steel with an aluminium bonnet and boot lid.
The bodies were mounted on a 2500mm wheelbase chassis, and this was the first Ferrari model to use a new factory reference number system prefixed with “F”, this was type reference F101 AC 100, and all were numbered in the odd chassis number road car sequence. The construction was along the same basic lines as the others of the period, with large section oval main tubes, cross bracing, and sub structures to support the body and ancillary equipment.
The model was available in right-or left-hand drive form, with power-assisted steering as standard, as were electric windows and air conditioning. The standard road wheels were five spoke “star” pattern alloy, with a knock-off spinner on a Rudge hub, although the USA, and certain other market cars, had a large central chrome plated nut to meet the then current legislation, Borrani wire wheels were available as an option.
The engine was similarly structured to the 365 GTB4 unit, with twin overhead camshafts per bank in the V12 unit of 4390cc capacity, with a bore and stroke of 81mm x 71mm.
Unlike that engine it did not feature dry sump lubrication, instead being fitted a standard wet sump system.
The cylinder heads were also different, as the engine was fitted with side-draught rather than down-draught carburettors, to reduce the bonnet height. The new cylinder heads had the inlet ports between the camshafts, rather than on the inside of the vee on the 365 GTB4 unit, which allowed the oil filters and emission control equipment to sit in the vee.
As with the chassis, the engine was the first in a new numbering sequence, with factory type reference F 101 AC 000. It was fitted with twin banks of three twin-choke Weber 38DC0E59/60 carburettors, those of the USA market cars carrying the suffix “A”.
A single coil and rear-of-engine mounted distributor ignition system was fitted on European market cars, with a twin distributor and electronic system fitted to USA market versions, to produce a claimed 320hp for both types. The USA market cars were also fitted with a number of devices to control exhaust gas emission, including a fast idle device, and an exhaust manifold air injection system.
The engine drove through a flywheel-mounted clutch, via a coupled five-speed all-synchromesh gearbox, in the same manner and of virtually the same layout as the 365 GT 2+2 model, including the self-levelling rear suspension system.
Taken from Ferrari's own website
Whilst every effort is made to ensure the accuracy of the above details, we do not warrant that such details are accurate.
Copyright Mike Wheeler 2022
“This material is protected by the laws of copyright. The owner of the copyright is Mike Wheeler. These details form part of my database, and are protected by the database rights and copyright laws. No unauthorised copying or distribution without my written permission”
Do you have an interesting Ferrari to sell?Contact Mike Wheeler